Back

Month-End Close Checklist for Controllers: A Day-by-Day Close Calendar

Last updated
November 19, 2026
Link copied!

Summary

  • A month-end close checklist is an ordered list of close tasks, each with an owner, a due day and an output.
  • A five-business-day close runs in this order: pre-close in the last three days of the month, AP and cutoff on Day 1, bank and card reconciliations on Days 1 and 2, accruals on Day 2, subledger tie-out on Day 3, reports on Day 4, sign-off and period lock on Day 5.
  • AP closes before accruals are reviewed, because goods and services received but not invoiced depend on the final AP balance.
  • Every reconciliation and adjusting entry needs a preparer, a different reviewer and support attached.
  • QuickBooks locks a period with a closing date. NetSuite uses a Period Close Checklist that starts with locking AP, AR and payroll.
  • Tasks that move into the last days of the month, such as clearing the bank feed and posting recurring entries, come off the post-month-end schedule and shorten the close.
  • LayerNext's AI agents capture, match and post supplier invoices, follow up with vendors on goods received without an invoice, match bank transactions as they land, prepare customer invoices from the month's transactions and prepare management reports, so Days 1 to 4 start with less manual work.

A month-end close checklist lists every task needed to finish the books for a month, in the order the tasks depend on one another, with an owner and a due day for each. The calendar below closes the month in five business days: pre-close work in the last three days of the month, then AP and cutoff, reconciliations, accruals, review, reports and sign-off.

‍

The close is harder than the list suggests because most of it waits on other people. AP waits on approvers, accruals wait on department managers who know what was received, and reports wait on all of it. Firms that time their close usually find that the data handling around the work takes longer than the judgment calls (CPA Practice Advisor). A list without days leaves the controller chasing each person, so this checklist gives every task a day.

‍

Month-end close checklist at a glance

The calendar fits a five-business-day close. If your reporting deadline is earlier or later, work backward from it and move the days to match.

Day

Task

Owner

Output

Last 3 business days of the month

Set the cutoff date, post recurring entries, clear the bank feed, clear pending approvals, issue customer invoices for the month, list goods received and work done but not invoiced

Controller, AP manager

Calendar sent, recurring entries posted, approval queue cleared, customer invoices sent

1

Capture every invoice dated in the month, match to POs and receipts, clear exceptions, accrue received-not-invoiced items, tie AP subledger to the general ledger

AP manager, AP clerk

AP aging that agrees to the general ledger, list of accrued receipts

1 - 2

Reconcile every bank and card account, match processor deposits, explain reconciling items

Staff accountant

Signed reconciliations

2

Post accrued expenses, prepaids, depreciation and reversals

Staff accountant

Adjusting entries with support

3

Tie each subledger to the general ledger, review the trial balance, correct errors

Controller

Reviewed trial balance

4

Run flux analysis (each account's change from last month and from budget), write commentary, build the close package

Controller, FP&A

Draft statements and commentary

5

Final review, sign-off, period lock, archive support

Controller, CFO

Locked period, signed package

Two orders do not change. AP closes before accrued expenses are reviewed, and reconciliations finish before reports are built. Everything else can move a day in either direction.

‍

What to do before the month ends

The last three business days of the month are the cheapest time to remove work from the close.

  • Set the cutoff date, which is the last day an invoice, receipt or expense report counts in the month, and send it to department heads and the receiving team.
  • Post or schedule recurring entries such as depreciation, amortization of prepaid expenses, rent and standing accruals.
  • Clear the bank feed so transactions are already coded or matched when the statement arrives.
  • Send the pending bill and expense report queue to each approver with a due day, and name a substitute for anyone on leave.
  • Issue customer invoices for recurring and usage-based billing from the month's transactions, so revenue is complete before the cutoff.
  • Ask receiving and department managers for goods received and work completed that have not been invoiced. This list drives the accrual on Day 1.

Send the cutoff date in writing with the calendar, so each owner knows their day.

‍

Close accounts payable first

AP goes first because accruals, the balance sheet and the expense reports all depend on the final AP balance. Day 1 covers six steps.

  1. Capture every invoice dated in the month, including those still in an email inbox, on an approver's desk or in a shared folder.
  2. Match each invoice to its purchase order and receiving record. A three-way match checks that the invoice agrees with the PO and with what was received. Differences beyond the tolerance, which is the amount your team allows before an invoice stops, become exceptions.
  3. Clear the exceptions or decide which ones to accrue.
  4. Accrue goods and services received but not invoiced. The entry debits the expense or inventory account and credits accrued liabilities, and it reverses on the first day of the next month so the invoice posts normally when it arrives. Services leave no receiving record, so the department manager confirms the work was done before it is accrued.
  5. Tie the AP subledger, the detailed list of open bills by vendor, to the AP account in the general ledger. Differences usually come from journal entries posted straight to the AP account and from bank clearing entries posted to the wrong account.
  6. Compare statements from your largest suppliers with open bills and claim any credits that were never applied.

‍

The same close from the AP side, with received-not-invoiced accruals and vendor statements in more detail, is in AP month-end close, step by step. LayerNext's AP automation follows up with vendors on goods received without an invoice, which gives step 4 a starting list.

‍

Reconcile your bank and card accounts

Days 1 and 2 belong to the staff accountant. Reconcile every bank account and every card account to its statement dated the last day of the month.

For each account, start from the statement balance, add deposits in transit, subtract outstanding checks and payments, and compare the result with the ledger balance. Then work through what is left.

  • Items on the statement but not in the books, such as bank fees, interest, returned payments and card charges nobody coded.
  • Payment processor deposits that arrive as one amount, net of fees, covering several invoices. Match the deposit to the invoices it paid and record the fee.
  • Items that were open last month and are still open. Investigate anything older than one month now, because items carried for months are hard to trace later.

A second person reviews and signs each reconciliation. High-volume accounts are easier to handle when they are matched weekly or daily, and some teams now match continuously. See real-time bank reconciliation.

‍

Post accruals and adjusting entries

Day 2 covers the entries that put each expense and revenue in the month it belongs to. An accrual records an expense when the work is done or the goods are received, even if the invoice has not arrived.

Typical entries:

  • Accrued expenses for services received and not invoiced, such as utilities, repairs and professional fees.
  • Payroll accruals for wages, bonuses and unused PTO earned but not paid.
  • Prepaid expenses released to expense. A $12,000 annual insurance premium paid in January is released at $1,000 a month.
  • Depreciation and amortization.
  • Reversals of last month's accruals.

Take $4,800 of repair work finished on November 27 and invoiced on December 3. The November close debits repair expense and credits accrued expenses for $4,800. The entry reverses on December 1. When the invoice posts on December 3, it goes to repair expense for $4,800 and nets to zero against the reversal, so November carries the cost and December does not.

Each entry needs support attached, such as the PO, the work order or the calculation, and a reviewer who did not prepare it.

‍

Review the books and lock the period

Day 3 is review. The controller checks that each subledger (AP, AR, inventory and fixed assets) agrees with its general ledger account, then reads the trial balance, the list of every account and its balance. Look for balances in the wrong direction, such as a debit balance in AP or negative cash, accounts with no activity that normally have some, and large entries posted in the last days of the month.

Day 5 is the lock. After the controller and CFO sign off, set the period lock, which is a date after which no one can post or edit entries without an override. Invoices that arrive after the lock go into the next period unless the amount is large enough that the controller reopens the month. Reopening needs a recorded reason.

‍

Prepare the reports and get sign-off

Day 4 produces the income statement, balance sheet and cash flow statement, plus budget versus actual. Run flux analysis on each. Compare every account with last month and with budget, and write a short explanation for any change above a threshold the controller sets, for example 10% and $5,000.

The close package for the CFO contains the statements, the commentary, a list of reconciliations with their sign-off dates and the adjusting entries posted this month. Day 5 sign-off confirms the numbers and the explanations before the period is locked. Save the package and its support in one folder so the next close, or an audit, starts from it.

For multi-entity reporting that stays current through the month, see financial reporting automation.

‍

Month-end close checklist for QuickBooks

QuickBooks does not close a month on its own. The ledger records what is entered, so your team completes the checklist above and QuickBooks locks the result.

In QuickBooks Online:

  • Work through the bank feed transactions awaiting review during the last week of the month, then reconcile each bank and card account.
  • Compare the A/P aging summary with the A/P balance on the balance sheet.
  • Post accruals and prepaid releases as journal entries.
  • Lock the period by turning on Close the books in the Advanced settings, under Accounting, and entering the closing date. Changes to transactions on or before that date trigger a warning or a password prompt (Intuit). QuickBooks Online does not move the date forward on its own, so change it each month.

In QuickBooks Desktop:

  • Reconcile each account from Banking, then Reconcile, run the A/P aging report and compare it with accounts payable on the balance sheet.
  • Lock the period from Company, Set Closing Date, then Set Date/Password, signed in as the admin (Intuit). The closing date restricts changes to old entries. It does not close the books the way NetSuite closes a period.

‍

Month-end close checklist for NetSuite

NetSuite closes a period through its Period Close Checklist, a task list the system tracks. The tasks you see depend on the features turned on in your account. The checklist covers locking and system tasks and works as the final step of a broader close, so the reconciliations, accruals and review above still happen first (Eide Bailly).

  • Lock the period to AP, AR and payroll transactions. This leaves a pre-closed state for balancing before the final close (NetSuite help).
  • Run the system tasks that apply to you: automated intercompany adjustments, revaluation of open foreign currency balances and calculation of consolidated exchange rates. Intercompany adjustments remove balances between your own subsidiaries. Revaluation restates foreign currency balances at the month-end rate.
  • Close the period. A closed period accepts no new posting transactions or edits that change the general ledger, and it must be reopened first. With multi-book accounting, you can close one book without the others. Reopening needs Edit or Full access to Manage Accounting Periods.

‍

How to reuse this checklist every month

Copy the calendar table into a spreadsheet or your task tool and use it as your accounting month-end close checklist template. Give each task a row, and add columns for preparer, reviewer, due day, status and a link to the support.

After each close, record which tasks finished late and why, then move those tasks earlier or split them. Review the calendar every quarter, because a new bank account, a new entity or a new ERP each adds tasks. Keep the checklist in one place that every owner can update, so the controller sees status without asking.

‍

How long a month-end close should take

Estimates vary. Many finance teams take seven to 10 working days (Ledge), and the average in a Vena survey was 6.2 business days (Vena). Five business days is a reasonable target for a company with a few bank accounts and one ERP. More entities, intercompany balances and inventory add days.

Measure your last three closes by task, then start with the tasks that can move before month end: the cutoff notice, recurring entries, the bank feed and AP matching during the month.

‍

How LayerNext helps with the month-end close

LayerNext's AI agents run the finance workflow a team defines. Custom workflows are configured without code, and business rules are written in plain English for each supplier or customer. Finance maintains both without waiting on a developer. The sections below follow a document through the close and name the calendar days each step affects.

‍

Invoice capture and matching

Supplier invoices arrive by email, a shared folder, cloud storage, a connected database or a phone photo. Customer invoices, purchase orders, bank statements and sales receipts can be collected from the same kinds of sources. The agent reads each invoice without vendor templates and flags duplicates at capture.

It matches the invoice to the purchase order and the receiving record or packing slip within tolerances the finance team sets. Anything that does not match becomes a task in the portal for a named person, and the task can be found by invoice number. On Day 1, invoices dated in the month are already captured and matched, and exceptions are tasks with owners instead of emails.

‍

Approvals and posting

Posting follows the approval rules your team sets. An invoice with nothing wrong posts without anyone approving it, and a person steps in for an exception, a question the agents need answered or an approval a rule assigns. Approvals can run through more than one level, and when an approver is on leave, tasks route to the substitute the system has been told about. Approvers get reminders on pending approvals, and LayerNext tracks how long each approver takes.

The agent posts into the ERP through its API where one exists (the connection a system offers so other software can send it data) and through the ERP's own screens where it does not. That covers QuickBooks Online and Desktop, NetSuite and older desktop ERPs. Every action is logged, and nothing is deleted or overwritten.

‍

Missing invoices and vendor statements

LayerNext identifies goods received without a matching invoice from receiving records and packing slips, then follows up with the vendor after a period you define. That is the same list the Day 1 accrual starts from. It can also email a vendor about a short shipment or a quantity that differs from the invoice, with the receiving details attached.

It reconciles vendor statements against open AP and applies supplier credit memos, which covers the statement comparison in step 6 of the AP close.

‍

Bank reconciliation

A live bank feed or an uploaded statement is matched to the ledger as transactions land. One-to-many, many-to-one and partial matches are handled, small variances clear, and only exceptions go to a person, along with flags on unusual amounts, new payees and duplicate payments. The staff accountant reviews exceptions on Days 1 and 2 instead of matching every line.

Customer billing

On the receivables side, LayerNext can pull the month's billable transactions from an ERP, prepare each customer's invoice under the billing rules you define, email it and send payment reminders by due date. This takes the billing run off the pre-close list.

Reports and visibility

The Insight Board shows how many items have been processed and how many are waiting on clarification, so the controller can see where the queue stands during close week. Reports sit at the end of the same flow: cash flow, margin and variance reporting across entities, current to today.

Across deployments, finance teams see 90 to 165 hours saved per month, 90 to 100% fewer processing errors and 95%+ task accuracy on defined workflows. The figures are not specific to month-end close, and they depend on invoice volume and data quality.

‍

Frequently asked questions

‍

1. How long should a month-end close take?

Many finance teams take six to 10 working days. Five business days is a practical target for a company with a few bank accounts and one ERP. Measure your current close by task, then move work that does not depend on the cutoff, such as recurring entries and bank feed clearing, into the last days of the month.

2. What is the difference between month-end close and year-end close?

A month-end close finalizes one month. A year-end close includes every month-end task plus year-specific work: closing income and expense accounts to retained earnings, preparing support for the audit, finalizing annual statements and tax schedules. It takes longer because the review covers twelve months of activity.

3. Who is involved in the month-end close?

The AP clerk and AP manager close AP, the staff accountant handles reconciliations and adjusting entries, and the controller reviews and locks the period. The CFO signs off. Department heads supply the cutoff information and confirm services received, and payroll supplies the payroll accruals.

4. What are month-end accruals?

Month-end accruals are journal entries that record an expense or revenue in the month it occurred, before the invoice or payment exists. A repair finished on November 27 and invoiced in December is accrued in November. The entry reverses on December 1, so the December invoice posts without counting the cost twice.

5. What is the AP month-end close process?

The AP month-end close captures every invoice dated in the month, matches invoices to POs and receipts, clears exceptions, accrues goods and services received but not invoiced, ties the AP subledger to the general ledger and compares vendor statements with open bills. The full sequence is in AP month-end close, step by step.

6. What does a month-end close checklist include?

A checklist includes pre-close tasks (cutoff, recurring entries, bank feed), the AP close, bank and card reconciliations, accruals and adjusting entries, subledger tie-out and trial balance review, reports with variance commentary, and sign-off, period lock and archive. Each task has an owner and a due day.

‍

‍

Written by,
Team LayerNext
Team LayerNext is made up of experienced writers with backgrounds in finance, engineering, accounting, data analytics, AI, and business operations, sharing practical insights on AI-powered bookkeeping and smarter financial decision-making.
Find what slows your close
Send us your last close checklist and the three tasks that ran longest. We will show where LayerNext's AI agents take over invoice capture, matching, bank reconciliation and reporting in your systems.
Talk to Sales